mixed adhesive

英 [mɪkst ədˈhiːsɪv] 美 [mɪkst ədˈhiːsɪv]

网络  混合粘合剂

化学



双语例句

  1. Determination of the acid value of soybean lecithin with the mixed solvent consisting of chloroform and alcohol Measure to Accelerate RTV CR Adhesive Setting up
    氯仿、乙醇作为溶剂测定大豆磷脂酸值加速室温硫化氯丁橡胶胶粘剂固化的途径
  2. I mixed up a batch of epoxy using adhesive filler and then laminated a piece of1 fiber tape inside.
    i混淆了一批使用环氧胶粘剂填料,然后叠层一块一光纤磁带内。
  3. Mixed solvents of CR adhesive accorded with new national standard
    符合国家新标准的氯丁胶粘合剂的混合溶剂研制
  4. The properties of gasification briquette, which is made from fine anthracite mixed with HM-3 adhesive, is better than that of lime carbonizing briquette currently used in small fertilizer plant in respect of compressive strength in cool and heat state and falling strength.
    在小氮肥厂以无烟粉煤加入HM-3粘结剂,制成气化型煤,检测其冷、热态抗压强度、落下强度,型煤性能优于目前工业上使用的石灰碳化煤球。
  5. The dosage of raw materials, the selection of low toxic mixed solvent and its formulation, and the selection of modifying agent are discussed. The formulation of the adhesive is optimized through orthogonal experiments.
    讨论了原料的用量,低毒性混合溶剂的选择和配比,并通过正交实验优化出主要原料的最佳配比。
  6. The reliability of mixed conductor LTCC substrates was analyzed, in respects of the microstructure, conductor adhesive force, wire-bonding strength, insulation resistance, etc.
    从混合导体LTCC基板的微观结构,导体的附着力,导体键合强度,多层互连导带电阻以及基板绝缘电阻等方面,对混合导体LTCC基板的可靠性进行了分析研究。
  7. After the modified starch adhesive has mixed with kenaf stalk powder, the quantity of heat required by reaction of solidification is far lower than that of independent starch adhesive.
    改性淀粉胶和麻秆粉末混合后,固化反应所需要的热量远远低于单独淀粉胶固化所需要的热量;
  8. Preparation of Low Toxicity Mixed Solvent for Polychloroprene Adhesive
    氯丁橡胶粘合剂低毒混合溶剂的制备
  9. When MC was mixed into mortar, water-retentive performance, toughness, adhesive performance of mortar have improved and 28d dry shrinkage of mortar has reduced.
    在干拌砂浆中加入MC(甲基纤维素醚)保水剂后,砂浆的保水性提高,韧性得到改善,粘结性能也得到了增强,砂浆的28d干缩值也有所下降;
  10. Study on Application of Silicone Resin together with Phenolic Resin as A Mixed Adhesive in Frictional Composites
    有机硅/酚醛树脂共混黏结剂在摩擦复合材料中的应用研究
  11. The test results indicate that the water resistance and bonding strength of the material are better than mixed adhesive.
    通过试验对比,表明这种新型的粘结料比水泥胶浆具有更好的耐水性和粘结强度。
  12. The results show that mixed chain-extending agents and silane coupling agent evidently increase adhesion strength of polyurethane hot-melt adhesive, but tackifying resins could not increase adhesive strength of polyurethane hot-melt adhesive evidently.
    结果表明:混合扩链剂和硅烷偶联剂能明显提高聚氨酯热熔胶的粘接性能,而试用的增黏树脂对提高聚氨酯热熔胶的黏结性能效果不明显。
  13. Results show that, when it is selected the curing agent system of B polyamid mixed with DETA multi-amines in dry environment, epoxy resin grouts have low viscosity, good grouting property and high adhesive strength, so it should select the system of mixed curing agent;
    研究结果表明:干燥环境中,采用B聚酰胺与DETA多胺混合固化剂体系时,浆液渗透性高、可灌性好、粘结强度高,因此,宜采用该混合固化剂体系;
  14. What is expected is achieved with mixed adhesive, which provides reference for the production of other polls while using binders.
    利用混合粘合剂制备硫糖铝片达到了预期目的,并为其他片剂在使用粘合剂方面提供参考。
  15. The sum of the solubility parameter and the hydrogen bond index of the solvent oil can be adjusted to 10.7 by adding industrial toluene. Then the economic mixed solvent can be used to produce certain SBS solvent-based adhesive with ideal viscosity.
    以工业甲苯调节使混合溶剂溶度参数和氢键指数之和为10.7左右,能够使生产出的胶液稳定在良好的粘度范围内。